Mistral Velocity Stack – MG-VS-REGT650

General Theory: What is Velocity Stack?

It is a device, generally with conical or cylindrical shape, which is mounted between the airbox where the air filter is contained and the throttle body.

What is its use and what are its benefits?

It is developed to increase the volumetric efficiency of the engine by providing in more air, reducing turbulence and improve the engine response at throttle opening.  This results is traduced in increased performance.

Length, taper and diameter are technical details that have a direct effect on the power erogation, finding the right dimensional ratio between these details, it is possible to reach better performance.

MISTRAL version

Our Velocity Stack, specific for Royal Enfield Continental GT 650 and Interceptor 650.

The product has been entirely studied and designed with CAD3D, then with the use of specific software to analyze the air flows in relation to the intake pressure we have defined shape and dimensions obtaining some prototypes. Then we developed the prototypes in reality through 3D printing and with the help of our test bench we tested them all to define the best for torque/power/rpm.

An excellent result on the entire power/torque curve, from the very first rpms the bike results immediately much more responsive, even at 3500 rpm where it suffers more we were able to obtain + 1cv of power and + 1Nm of torque, then increasing the revs the gain increases both in terms of net power and torque till a maximum of +2.3 cv and +3.5 Nm.

The product is completely machined from solid with the best technologies on the market, installation is very simple and does not require modifications to the bike.

 

 

Specific for

Royal Enfield

Continental GT 650 E4/E5

Interceptor 650 E4/E5

Code

MG-VS-REGT650

Installation

The product is placed in the airbox, the operation is simple and it’s included the video-tutorial, accessible trough QR code

Installation time: 5/7 min.

Not required any modification to the bike

 

Blue Line: original airbox 

Red Line: classic Stage 2 composed by racing air sistem with the removal of airbox’s cap. In this case the cap is replaced with a plate support that hold the filter and open the filter’s hole. The solution is meliorative but does not guarantees the better performances

Green Line: obtained results with our Mistral Stage 2+, composed by Racing Air Filter and Mistral Velocity Stack. Thanks to the design, it protect the filter from rain

Questions and answers

Where is the product installed?

The product is installed in the airbox, the installation time is 5/7 minutes, no modifications to the bike are required.

Why didn’t the Royal Enfield company directly develop this component?

Royal Enfield company optimizes the bike and prepares it for the sale, it is not certain that the solutions adopted are the best ever, in fact it is possible to optimize any detail having the appropriate knowledge and doing specific tests.

Why did you produce it in aluminum or not in 3D printing like prototypes to make it cheaper?

3D printing is very useful for prototyping however the printed fibers are permeable to liquids and also do not guarantee long-term stability to solvents, gasoline and heat, subjected to these variables they can easily deform. Aluminum is the ideal solution: it is resistant, the surface is perfectly smooth and it is eternal. There are other 3D printing techniques that can be used for the product, however the cost would have been similar to aluminum, so with the same characteristics and being able to develop it in aluminum, we opted for this material.

On a completely original bike, does it works?

The development was done on a completely original bike, so yes.

On motorcycles with modified components, catalyst remover, sport catalyst, big bore headers pipes, exhaust, sport air filter, etc., the gain is similar and proportionally linked to the modifications already made.

Does it need a remappaing of the ECU?

No, it doesn’t. We develope any our component to be 100% compatible with the stock bike and original fuel map. No modifications to the ECU or to the bike are necessary. The remappaing is a next step to have another increasement in performance. We offer this service just in our company.

 

For better performances we recommend Mistral Racing Air Filter

Mistral Velocity Stack – MG-VS-REGT650, for more information contact us

CONSENT OF THE INTERESTED PARTY TO THE PROCESSING OF PERSONAL DATA Pursuant to art. 7 of EU Reg. 2016/679, I authorize M.G. snc di Micheli e C. to the processing of personal data and to be contacted again, following my request, to receive information, also relating to products/services and for internal operational or management needs.

Mistral Velocity Stack – MG-VS-REGT650, related products:

You may also like…

logo mistral whatsapp

MISTRAL
Exhaust Systems

Come possiamo aiutarti?
Contattaci
logo mistral whatsapp

MISTRAL
Exhaust Systems

How can we help you?
Contact us